Warehouse Guys

Amazone | Pine Above Ground Pool

$0.00
  • Pine Above Ground Pool
Pine Above Ground Pool Buff Dark Brown Dark Walnut Wood Smoke

Warehouse Guys

Amazone | Pine Above Ground Pool

$0.00

Description

AMAZONE COMPONENTS - Round

Structural panels

  • Copper-azole-treated yellow pine – Amazone only
  • Width: 4’ (1.20 m)
  • Height of walls: 52” (1.32 m)
  • Factory-preassembled with planks mortise and tenon moulded.
    Amazone: plain planks roughly 3 ½” (8.75 cm) wide.

Wall panels

  • Flexible
  • Their number determines the size of the pool

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws
    Amazone: yellow pine
    Boreale: red pine

Borders

  • Made of 100 % wood, 9” (23 cm) wide

Seat caps

  • Made of antiskid injected resin, very easy to install

Fastener cover

  • Attractive and safe

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

AMAZONE COMPONENTS - Oval

Structural panels

  • Copper-azole-treated yellow pine
  • Width: 4’ (1.22 m)
  • Factory-assembled with plain planks roughly 3½” (8.9 cm) wide, mortise and tenon moulded
  • Height of walls: 52” (1.32 m)

Round wall panels

  • Flexible
  • Their number determines the size of the pool

Straight wall panels

  • Made by converting flexible panels into rigid panels using longitudinal steel tube reinforcements with the following dimensions: 1 ½” x 2 ½” x 1/8” (3.81 cm x 6.35 cm x 3.175 mm)
  • Pre-treated with zinc phosphate by 11-step immersion (E-coat) for greater protection against corrosion (subjected to 2000-hour salt fog resistance testing) and covered with polyester powder paint
  • Galvanized steel parts are used for straight wall panel assembly and visible parts are covered with polyester powder paint for maximum protection against corrosion and UV damage (parts have been subjected to humidity and salt fog resistance testing for 1500 hours)

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws

Borders (Top rails)

  • Single-piece border made of 100 % wood, 9” (23 cm) wide – Amazone only

Seat caps

  • Made of antiskid injected resin, very easy to install

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

Bolts, nuts and screws

  • Protected by a Magni 599 coating
  • Salt-fog tested 1000 hours
  • Approved for use with treated wood

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

Model with load strut

  • Straight walls supported by a load strut system made of wood

Model without load strut (Brace)

  • Sturdy assembly of straight walls can be done by installing a steel beam structure with the following dimensions: 2 1/2’’ x 3 1/2’’ x 3/16’’ (6.35 cm x 8.90 cm x 4.76 mm)

for more information check out http://www.aquabois.com/en/fsav