Section
Drop element here!

Summers are short, make the most of them!

Above Ground Swimming Pools

Above Ground Swimming Pools are the most cost-efficient way to add a "water attraction" to your backyard! Installed in just days and for a fraction of the price of an inground pool or swim spa, it's easy to see why our Above Ground Pool department grows every year. If you want to get an Above Ground Pool in your yard, contact us for an easy, no-pressure quote!

Canyon Resin | Above Ground Pool
Canyon Resin | Above Ground Pool

Canyon Resin | Above Ground Pool

Canyon Resin Above Ground Pool

THE POOL OF THE 21ST CENTURY!

Aqua Master Above Ground Swimming Pool

Urban resin pool respecting current design trends.

Novelty: Optional 7-colour solar lighting built into the top seats illuminating the inside of the pool.

Proudly made in Canada


Sizes

ROUND OVAL
12' 15' 18' 10'x16' 10'x21' 13'x17'
21' 24' 27' 13'x23' 15'x20' 15'x26'
15'x31' 18'x33' 

 

Specifications

 

HEIGHT

52'' (1.37 m)corrugated steel wall

TOP SEAT

8” (22,86 cm) injected resin top seat - Color: Urban Gray

with 7 colors solar lamp (option)

UPRIGHT

7” (17.78 cm) extruded resin upright - co-extrusion - color: Urban Gray /  Slate

TOP TRACK

Injected resin top track

SEAT CAP

Injected resin seat cap

BOTTOM TRACK

Heavy-duty injected resin bottom track with integrated lock system

View Details
Quantum Hybrid | Above Ground Pools
Quantum Hybrid | Above Ground Pools

Quantum Hybrid | Above Ground Pools


Quantum Hybrid Above Groud Swimming Pool

Quantum Above Ground Swimming Pools

ROUND OVAL
12’ 15’ 18’ 12’x18’
21’ 24’ 27’ 12’x24’ 16’x26’ 16’x32’
18’x33’ 

Specifications

HEIGHT

52” (1,37 m) corrugated steel wall

TOP SEAT

7" (17,78 cm) extruded resin top seat

UPRIGHT

6" (15.24 cm) galvanised steel upright

TOP TRACK

Resin top track

SEAT CAP

Resin seat cap

BOTTOM TRACK

Heavy duty injected resin bottom track with integrated lock system and resin bottom connector.

View Details
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool
Savanna | Pine Above Ground Pool

Savanna | Pine Above Ground Pool

Savanna | Pine Above Ground Pool 

Round

Structural panels

  • Copper-azole-treated yellow pine
  • Width: 4’ (1.22 m)
  • Factory-assembled with plain planks roughly 3½” (8.75 cm) wide, mortise and tenon moulded
  • Height of walls: 52” (1.32 m)

Round wall panels

  • Flexible
  • Their number determines the size of the pool

Columns

  • Sturdy columns for borders made of injected resin

Borders (Top Rails)

  • Rounded forms made of talc-filled resin 7” (17.5 cm) wide
  • Easy to install

Seat caps

  • Sleek, made of injected resin and easy to install

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

Rail system

Aqua-Wood has designed an injected resin rail system.

The rails are easy to assemble. They are 3” wide at the base, and therefore provide very solid support for the pool panels, while also making the task of wall assembly easier.

This system also makes it possible to assemble the pool without using cement blocks as a foundation.

The ground preparation method is therefore identical to conventional round above ground pools.

 

AMAZONE AND BOREALE COMPONENTS

Structural panels

  • Copper-azole-treated yellow pine – Amazone only
  • ACQ-treated red pine – Boreale only
  • Width: 4’ (1.20 m)
  • Height of walls: 52” (1.32 m)
  • Factory-preassembled with planks mortise and tenon moulded.
    Boreale: grooved planks roughly 4” (10 cm) wide
    Amazone: plain planks roughly 3 ½” (8.75 cm) wide.

Wall panels

  • Flexible
  • Their number determines the size of the pool

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws
    Amazone: yellow pine
    Boreale: red pine

Borders

  • Made of 100 % wood, 9” (23 cm) wide

Seat caps

  • Made of antiskid injected resin, very easy to install
  1. Column
  2. Wood Border
  3. Seat cap

Fastener cover

  • Attractive and safe

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.
  1. Fastener cover
  2. Cables

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

Important notice: Amazone models are not designed for semi-inground installation. Installing an Amazone model semi-inground could affect the pool’s warranty.

Oval

Structural panels

  • Copper-azole-treated yellow pine
  • Width: 4’ (1.22 m)
  • Factory-assembled with plain planks roughly 3½” (8.75 cm) wide, mortise and tenon moulded
  • Height of walls: 52” (1.32 m)

Round wall panels

  • Flexible
  • Their number determines the size of the pool

Columns

  • Sturdy columns for borders made of injected resin

Borders (Top Rails)

  • Rounded forms made of talc-filled resin 7” (17.5 cm) wide
  • Easy to install

Seat caps

  • Sleek, made of injected resin and easy to install
  1. Column
  2. Resin Border
  3. Seat cap

Fastener cover

  • Attractive and safe

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

 

Structural panels

  • Copper-azole-treated yellow pine
  • Width: 4’ (1.22 m)
  • Factory-assembled with plain planks roughly 3½” (8.9 cm) wide, mortise and tenon moulded
  • Height of walls: 52” (1.32 m)

Round wall panels

  • Flexible
  • Their number determines the size of the pool

Straight wall panels

  • Made by converting flexible panels into rigid panels using longitudinal steel tube reinforcements with the following dimensions: 1 ½” x 2 ½” x 1/8” (3.81 cm x 6.35 cm x 3.175 mm)
  • Pre-treated with zinc phosphate by 11-step immersion (E-coat) for greater protection against corrosion (subjected to 2000-hour salt fog resistance testing) and covered with polyester powder paint
  • Galvanized steel parts are used for straight wall panel assembly and visible parts are covered with polyester powder paint for maximum protection against corrosion and UV damage (parts have been subjected to humidity and salt fog resistance testing for 1500 hours)

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws

Borders (Top raill)

  • Borders made of talc-filled resin, 9” (23 cm) wide – Savanna XL only

Seat caps

  • Made of antiskid injected resin, very easy to install

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

Bolts, nuts and screws

  • Protected by a Magni 599 coating
  • Salt-fog tested 1000 hours
  • Approved for use with treated wood

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

Model with load strut

  • Straight walls supported by a load strut system made of wood

Model without load strut (Brace)

  • Sturdy assembly of straight walls can be done by installing a steel beam structure with the following dimensions: 2 1/2’’ x 3 1/2’’ x 3/16’’ (6.35 cm x 8.90 cm x 4.76 mm)

Fastener cover

  • Attractive and safe
View Details
Toundra | Pine Semi Inground Pool
Toundra | Pine Semi Inground Pool

Toundra | Pine Semi Inground Pool

 Toundra Pine Semi Inground Pool

Oval & round options are available!

Aqua Wood pools are made wholly of treated pine, a material whose quality greatly exceeds that of cedar. And to enhance its performance, even more, Aqua-Wood uses red pine that has undergone a chemical treatment that makes it even more durable.

Please note that it is not suggested to install more than 24” into the ground in our region.

OVAL SEMI-INGROUND:
Toundra (Resin BORDERS)

Structural panels

  • Made of ACQ-treated red pine
  • Width: 4’ (1.22 m)
  • Factory-assembled with grooved planks roughly 4” (10 cm) wide, mortise and tenon moulded
  • Height of walls: 48” (1.2 m)

Round wall panels

  • Flexible
  • Their number determines the size of the pool

Straight wall panels

  • Made by converting flexible panel into the rigid panel using longitudinal pressure-treated wood reinforcements
  • Hybrid wood load strut and galvanized steel horizontal forestay system covered in cement during installation for greater stability
  • Galvanized steel parts are used for load strut assembly and visible parts are covered with polyester powder paint for maximum protection against corrosion and UV damage (parts have been subjected to humidity and salt fog resistance testing for 1500 hours)

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws

Borders (Top rails)

  • Made of 100 % wood, 9” (23 cm) wide – Boreale only

Fastener cover

  • Two-seat caps of talc-filled resin

Cables

  • Two 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

Bolts, nuts and screws

  • Protected by a Magni 599 coating
  • Salt-fog tested 1000 hours
  • Approved for use with ACQ-treated wood

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in-ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool 


ROUND SEMI-INGROUND:
BOREALE (WOODEN BORDERS)

Structural panels

  • Made of ACQ-treated red pine
  • Width: 4’ (1.20 m)
  • Factory-assembled with grooved planks roughly 4” (10 cm) wide, mortise and tenon moulded
  • Height of walls: 52” (1.32 m)

Wall panels

  • Flexible
  • Their number determines the size of the pool

Columns

  • Made of 100 % wood, sturdy and attractive
  • Handcrafted at the factory then assembled with glue and screws

Borders (Top rails)

  • Made of 100 % wood, 9” (23 cm) wide – Boreale only

Seat caps

  • Made of antiskid injected resin, very easy to install, attractive and safe

Fastener cover

  • Three seat caps of talc-filled resin

Cables

  • Three 5/16” (8 mm) galvanized steel cables form the pool’s strong assembly
  • Plastic coated for a sleek appearance and for protection from chemicals and salt
  • Cable breaking point: 9,800 lbs.

Insulation

  • Foam insulation 1/8” (3.2 mm) thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

  • Vinyl liner secured with a standard in ground pool fastening system, factory installed

Packaging

  • Delivered on a pallet in 3 or 4 boxes, depending on the size of the pool

 

For more information check out the manufacturers site http://www.aquabois.com/en/
View Details
Samoa | Rectangular Semi-Inground Pool
Samoa | Rectangular Semi-Inground Pool

Samoa | Rectangular Wooden Semi-Inground Pool

Samoa | Rectangular Wooden Semi-Inground Pool

Structure

The pool has 52" sides 24" below the ground and 28" above the ground which means that all of the structures are hidden underground.

 

Please note that it is not suggested to install more than 24” into the ground in our region.

 

Structural Panels

  • Made from treated wood
  • Preassembled at the factory
  • Heigh of walls; 52"

Corners

  • 12" radius
  • Supported by 2 columns
  • Injected Resin Seat Caps
  • Preassembled with a curved galvanized steel structure

Columns

  • Sturdy Columns for borders made from 100% wood

Borders (Top Rails)

  • Grooved wood borders 9"
  • Injected resin seat caps

Insulation

Foam insulation 1/8" thick inserted between the liner and the walls, which creates a smooth surface and protects the liner

Liner

Vinyl liner & standard inground pool fastening system

Load Struts (brace)

Galvanized steel brace and retention plates affixed where the panels meet, covered with cement for added stability.

Packaging

Delivered on a pallet in 3 of 4 boxes depending on the size of the pool.

Wall Height

  • The wall height is 52". 
  • Flat Bottom
View Details